FUJIKURA FSM-88S+ Fiber Core Alignment Fusion Splicer

The latest 88S+ single-core fiber fusion splicer is based on the 88S and is equipped with two innovative technologies: intelligent blade management technology and intelligent splicing control technology. Their combination can provide stable low-loss splicing. Even if an accidental fiber cut occurs during splicing, the 88S+ can optimize the discharge parameters in real time to minimize the splicing loss, thereby minimizing the chance of re-splicing and rework.

Feature

1. Intelligent welding control technology
2. Intelligent blade management system
3. Large-capacity battery
4. 7 seconds to complete welding, 9 seconds to complete heating
5. Large screen display
6. Powerful automation function
7. Fiber fixing clamp function
8. Tool-free replacement of electrode rods

Specification

Product Detail

Compatible with loose tube optical fiber

1. Flip the white plastic to enable the loose tube fiber compatible function
2. When splicing loose tube fiber, there is no need to replace the fiber clamp like most splicers
3. With eye-catching function on status prompt

Manually replaceable electrode rod

1. Easy for operators to replace the electrode rod when it is worn out or outdoors
2. Easy to maintain the objective lens without using tools
3. Remember to use the discharge correction after reinstalling the electrode rod

Extremely convenient sleeve alignment

1. The distance between the two clamp edges is 60mm, and it is very convenient to align the heat shrink sleeve with the welding point
2. The overall welding heating speed is significantly improved
3. The operation is simpler and convenient for novices to use

Newly designed workbench

1. Can be freely spliced ​​and disassembled to adapt to different environments
2. Built-in large space to store various tools
3. Equipped with a cooling tank to place the heated heat shrink tubing