Customized LC/UPC Single Mode/Multimode 0.9/2.0/3.0mm Pre-polished Ferrule Field Assembly Connector Fast/Quick Connector

The LC/UPC fast connector are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers.

The Field Assembly Connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and with the expansion of FTTH, is already proving itself to be the connector of choice by incumbents, municipalities, utilities & alternative carriers. Our Field Assembly Optical Connector series are now available in SC, LC, or FC variants, catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode and multimode fiber types, including Multi-mode 62.5/125um and Multi-mode 50/125um. The single-mode versions are available with SPC or APC ferrules.

Specifications

---

Quality Certifications

---

Features

Pre-polished Connectors Support Installating in the Field

Fast connectors are designed for premise environments, patch panels, and rapid repair/replacement requirements, as well as applications requiring fast network deployment.

Reinserted up to Two Times          For Singlemode/Multimode Optic Cables          Insertion Loss ≤0.35dB

---

Operating Instructions

          

1. Insert the fiber into the boot
2. Strip off the strengthened layer of the cable and reserve aramid yarn 25.4-26.4mm
3. Cut the bare fiber to 10-12mm with a fiber cleaver

          

4. Insert the fiber into connector body through fiber guide and stop when it bends
5. Push the fixed ring forward to lock the fiber, and then install the tail sleeve
6. The installation is completed.